RIFF JTAG -CDMA Samsung F619 supported
by admin on Oct.07, 2011, under News
07.10.2011 CDMA Samsung F619 supported
The Samsung F619 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Samsung F619:
- Solder JTAG cable to Samsung F619 JTAG pads;
- Connect USB cable;
- Make sure Samsung F619 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘9’ key and press ‘Power ON’ button.
