RIFF Box – JTAG Revolution

07.07.2011  HTC Wildfire S A510E (HTC Marvel), More CDMA models supported.

Resurrecting HTC WildFireS is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.01.0002 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PC4910000′. Additionally, you can check ‘Repair RECOVERY zones’ to reflash android BOOT and RECOVERY code.

To resurrect HTC WildFireS:

•  Solder JTAG cable to HTC WildFireS JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure HTC WildFireS is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see usual android boot mode screen.

 

• Samsung B139 Repair/Unbrick, Read/Write NOR Flash
• Samsung B259 Repair/Unbrick, Read/Write NOR Flash
• Samsung B309 Repair/Unbrick, Read/Write NOR Flash
• Samsung B319 Repair/Unbrick, Read/Write NOR Flash
• Samsung B379 Repair/Unbrick, Read/Write NOR Flash
• Samsung B619 Repair/Unbrick, Read/Write NOR Flash
• Huawei C31 Repair, Read/Write NOR flash

12.04.2011   HTC Polaris (HTC Cruise) Unbrick, Unlock, IMEI and CID Update, ModelID repair supported

Resurrecting HTC Polaris is easy.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.20.AxeBox. Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘POLA10000′.

To resurrect HTC Polaris:

• Solder JTAG cable to HTC Polaris JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure HTC Polaris selected in the list of models;
• If you use battery, press Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

09.04.2011    HTC 7 Mozart Unbrick, Unlock, IMEI Repair, CID Repair, ModelID Repair supported

Resurrecting HTC Mozart is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.60.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD6710000′.

To resurrect HTC Mozart:

• Solder JTAG cable to HTC Mozart JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure HTC Mozart is selected in the list of models;
• If you use battery, press Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ key and press ‘Power ON’ button.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

29.11.2010 HTC Wildfire Unlock, IMEI Change/Repair, CID Update, Unbrick – Boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Wildfire.dll” contains pinout, instructions and required repair files for HTC Wildfire Unlock, IMEI Change/Repair, CID Update, Unbrick – Boot repair.

21.10.2010  SE Xperia X1 (HTC Kovalsky) Unbrick, Unlock, IMEI Change, Model ID repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“SE_X1.dll” contains pinout, instructions and required repair files for SE Xperia X1 (HTC Kovalsky) Unbrick, Unlock, IMEI Change, Model ID repair.

19.10.2010  HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick, IMEI Change, CID Change supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_raphael.dll” contains pinout, repair instructions and required repair files for direct HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick, IMEI Change, CID Change.

19.10.2010  HTC Niki – HTC Touch Dual Unlock, Unbrick, IMEI Change, CID Change supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Niki.dll” contains pinout, repair instructions and required repair files for direct HTC Niki – HTC Touch Dual Unlock, Unbrick, IMEI Change, CID Change.

13.10.2010 HTC HD2 LEO CID Change and Unlock update

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick, IMEI repair and CID Change.

02.09.2010 HTC HD2 LEO Direct Unlock supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick and IMEI repair.