RIFF Box – Best JTAG Box in this Galaxy :) Easy to operate !

Tag: ZTE

RIFF JTAG – Samsung GT-P6200 Galaxy Tab 7.0 Plus, ZTE Light Tab (ZTE V9), Orange Boston (Commtiva Z71), Huawei Ideos S7, unbrick – boot repair supported

by on Feb.17, 2012, under News

17.02.2012   Samsung GT-P6200 Galaxy Tab 7.0 Plus, Orange Boston (Commtiva Z71), Huawei Ideos S7, unbrick – boot repair supported

  • Samsung GT-P6200 Galaxy Tab 7.0 Plus 

    Samsung P6200 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
    Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on._
     

  • Huawei Ideos S7Resurrecting Huawei S7 is simple.
    Connection can be established with charger connected while battery is inside. . .
    .

     

  • ZTE Light Tab (ZTE V9)Resurrecting ZTE V9 is easy. Phone is auto powered on with USB Data Cable connected. . .
    _
  • Orange Boston (Commtiva Z71)
    Resurrecting the Orange Boston is easy.  I requires 4.2v external power supply, and some basic soldering skills. . .
    .

To download these new updates, You need to click “Check for Updates” button on Box Service TAB in RIFF JTAG Manager software.

Comments Off :, , , , , , , , , , , , , , , , , , , more...

RIFF JTAG – CDMA ZTE C370 Repair supported

by on Apr.22, 2011, under News

22.04.2011  CDMA ZTE C370 Repair supported

Resurrecting ZTE C370 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0098/0×0096

To resurrect ZTE C370:

  • Solder JTAG cable to ZTE C370 JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure ZTE C370 is selected in the list of models;
  • Click Resurrect button;
  • Choose which areas to flash;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Comments Off :, , , , , , , , , , , , , , more...

RIFF JTAG – CDMA ZTE Striker (S1602) Boot Repair supported

by on Apr.12, 2011, under News

12.04.2011  CDMA ZTE Striker (S1602) Boot Repair supported

Resurrecting ZTE S1602 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x87FFFF).

To resurrect ZTE S1602:

  • Solder JTAG cable to ZTE S1602 JTAG pads;
  • Connect ignition cable for auto power on or use battery;
  • Make sure ZTE S1602 is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

Comments Off :, , , , , , , , , , , , more...

RIFF JTAG – DELL XCD28 (ZTE Racer) Unbrick, dead boot repair supported

by on Dec.16, 2010, under News

16.12.2010  DELL XCD28 (ZTE Racer) Unbrick, dead boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“DELL_XCD28.dll” contains pinout, instructions and required repair files forDELL XCD28 (ZTE Racer) Unbrick, dead boot repair.

Comments Off :, , , , , , more...

RIFF JTAG – CDMA Update, ZTE-C N600 Boot repair/Unbrick supported

by on Dec.10, 2010, under News

10.12.2010  CDMA Update, ZTE-C N600 Boot repair/Unbrick supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_N600.dll” contains pinout, instructions and required repair files for ZTE-C N600 Unbrick/Boot repair.

Comments Off :, , , , , , , more...

RIFF JTAG – ZTE MF627 Modem Unbrick dead boot repair supported

by on Aug.04, 2010, under News

04.08.2010  ZTE MF627 Modem Unbrick dead boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF626.dll” contains pinout, repair instructions and required repair files for ZTE MF626, MF627 Modem dead boot repair.

Comments Off :, , , , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Archives

All entries, chronologically...